| Electrical | 120-277V or 347V high power factor electronic fluorescent ballast (<10~25% THD). Replaceable high-brightness ANSI 3000K or 4000K LED array source with integral 120V electronic high power factor driver (<20%THD). |
|---|
| Hardware | Six stainless steel Torx® with center pin fasteners. Internal brackets and fasteners are non-corrosive. Surface Conduit Adapter (SCA) accessory – aluminum trim frame assembly with integral J-box; finished to match lens frame. Water-tight conduit fittings supplied by others. |
|---|
| Housing | Marine grade extruded aluminum. Marine grade die-cast aluminum end caps. TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours. |
|---|
| Inner Lens | UV-stabilized, high impact resistant, extruded 100% DR acrylic frost lens. Nominal thickness. 100". Lens secured in place by lens frame. |
|---|
| Listings | UL and CUL listed for Wet Location – vertical wall mount only. UL certified IP64 per IEC 60598. ADA Compliant (SCA Option is non-ADA). Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
|---|
| Outer Lens | Thermoformed, UV-stabilized impact resistant polycarbonate, and frost or clear acrylic. See Ordering Information for options. Nominal thickness .125". |
|---|
| Patent | U.S. Patent No. D610,294. |
|---|
| Photometrics | For photometric information, go to www.kenall.com. |
|---|
| Reflector | Die-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity. |
|---|
| Warranty | Standard six-point mounting and polycarbonate lens required for Peace of Mind Guarantee®. One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. |
|---|