Skip to Content
Kenall Manufacturing - Homepage
Main Content

MLAS838

Millenium Auracyl Sconce for Architectural High Abuse

MLAS838_HF_PAN_CS.png
MLAS838_HF_PAN_CS.png
Model #: MLAS838
Features:
  • Surface wall mount – 8"W×38"H
  • Marine grade aluminum housing with die-cast end caps
  • Peace of Mind Guarantee®
  • UL certified IP64 per IEC 60598
Application(s):Parking Garage
Parks and Recreation
Multifamily Housing
Cafeterias
Walkways
Washrooms (Correctional)
Restrooms
Nursing Stations
Patient Rooms
Schools and Universities
Transportation Platforms
Foyers and Lobbies
Isolation Areas
Corridors
Exteriors and Entryways
Lamp Type(s):LED
Linear Fluorescent
Size(s):8"×38"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range, maximum driver source of 200 μA. Consult factory for flourescent options.
HardwareSix stainless steel Torx® with center pin fasteners. Internal brackets and fasteners are non-corrosive. Surface Conduit Adapter (SCA) accessory – aluminum trim frame assembly with integral J-box; finished to match lens frame. Water-tight conduit fittings supplied by others.
HousingMarine grade extruded aluminum. Marine grade die-cast aluminum end caps. TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours.
Inner LensUV-stabilized, high impact resistant, extruded 100% DR acrylic frost lens. Nominal thickness. 100". Lens secured in place by lens frame.
ListingsUL and CUL listed for Wet Location – vertical wall mount only. UL certified IP64 per IEC 60598. ADA Compliant (SCA Option is non-ADA). Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Outer LensThermoformed, UV-stabilized impact resistant polycarbonate, and frost or clear acrylic. See Ordering Information for options. Nominal thickness .125".
PatentU.S. Patent No. D610,294.
PhotometricsFor photometric information, go to www.kenall.com.
ReflectorDie-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity.
WarrantyStandard six-point mounting and polycarbonate lens required for Peace of Mind Guarantee®.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Additional Resources

top