Skip to Content
Kenall Manufacturing - Homepage
Main Content

METDU

Millenium Metrex Exit & Emergency

METDU Main Image
METDU Main Image
Model #: METDU
Features:
  • Surface mount – wall or ceiling; Double Face
  • Indirect Red or Green LED
  • Internal Battery Backup System
  • High impact injection polycarbonate construction
Application(s):Parks and Recreation
Packaging and Staging
Multifamily Housing
Cafeterias
Restrooms
Stairwells
Showers
Signage
Schools and Universities
Foyers and Lobbies
Corridors
Gymnasiums and Multipurpose Rooms
Natatoriums
Exit
Lamp Type(s):LED
Listings:       
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

CanopyHigh impact, injection molded polycarbonate canopy cover with heavy gauge galvanized steel mounting plate with integral 1/4-20 threaded studs. Canopy mounting plate provided with four-point mounting holes, one wireway hole and temporary junction box mounting holes. Closed cell die-cut Neoprene gasket seals canopy to mounting surface.
Electrical624 nm Red or 527 nm Green LED light source. Electrical components mounted to removable high impact, injection molded polycarbonate chassis. Remote Exit Ready – can power one Kenall METSS Satellite Exit.
HousingHigh impact, injection molded polycarbonate. Housing provided with canopy mounting and wireway drill points top and side – see Cross Section/Details. Closed cell die-cut Neoprene gasket seals housing to canopy.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®. Drill points provided for optional conduit entry.
LegendLegend illuminated by internal high output LEDs. Lettering six inches high with .750" stroke. Polycarbonate red or green filter panels. High impact, injection molded polycarbonate stencil and field selectable chevron inserts.
ListingsUL and CUL listed for Wet Location. UL certified IP64 per IEC 60598. Meets or exceeds UL924 and NFPA 101 standards. Meets or exceeds CSA and NRCAN requirements.
OptionsSealed nickel-cadmium Emergency Battery Pack (EL) with standard deep cycle battery conditioning, self test and self diagnostic circuitry, remote laser activated test switch, protected mechanical test switch and status indicator. Provides 120 minutes of emergency operation. The Emergency Battery Pack (EL) is suitable for 10°C to 45°C (50°F to 113°F). Cold Weather Emergency Battery Pack (CEL) suitable for -45°C to 45°C (-49°F to 113°F). (When used with a Kenall METSS, this fixture provides 90 minutes of emergency operation.)
ShieldUV-stabilized, high impact, injection molded clear polycarbonate. Nominal thickness .120". Captive stainless steel Torx® with center pin fasteners secure shield to housing. Continuous closed cell silicone gasket seals shield to housing.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

REVIT Files

Additional Resources

top