MedMaster Envela Recessed Luminaires

ME14 Main Image
ME14 Main ImageEnvela MaintenanceEnvela Perf Lens
Model #: ME14
  • Ceiling mount – 1'×4'
  • Fully sealed NSF2 rated impact resistant acrylic lens
  • Tool-less access for relamping and maintenance
Nursing Stations
Patient Rooms
Foyers and Lobbies
Lens Type(s):Clear DR Acrylic with Internal Perforation
Frost High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalFluorescent: Electronic 120, 277 or 347V ballasts high power factor (<10% THD). Lamps by others. LED: Replaceable high-brightness ANSI 3000K, 3500K or 4000K array. 80 CRI minimum standard, 90 CRI available on 3000K lamp. 120-277V AC, 50/60HZ, high power factor electronic driver. Optional dimming capability through compatible 0-10V dimmer (supplied by others). Dimming range is 10%-100%. Light engine and driver are replaceable post-installation.
Flange18-gauge CRS, standard 4-piece construction, spot-welded to housing. Mitered and welded corners.
Housing20-gauge CRS. One-piece seam welded construction. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
InstallationGrid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit.
Lamp ShieldingFully gasketed, sealed luminous shield of impact resistant DR acrylic. See Ordering Information for lens options.
ListingsUL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/ Non-Food Zone. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. CCEA Approved.
PatentU.S. Patent No. 8,511,850.
Reflector/Lens Assembly20-gauge CRS. One-piece seam-welded construction. Tool-free lamp access. White High (92%) Reflectance Low Gloss TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown complies with the Buy American Act.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Buy American Act Compliant


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.