Skip to Content
Kenall Manufacturing - Homepage
Main Content

ME11MRI

MedMaster Envela Luminaires - MRI/Imaging Suites

ME11MRI Main Image
ME11MRI Main ImageEnvela Maintenance Pt1Envela Maintenance Pt2Envela Maintenance Pt3Envela MaintenanceEnvela Perf LensME11 No PerfME11 Corner Inset
Model #: ME11MRI
Features:
  • Ceiling mount – 1'×1'
  • Non-ferrous construction safe for sensitive MRI equipment
  • Dimmable LED with same output as 32-watt CFL
  • Tool-less access for relamping and maintenance
Application(s):MRI Imaging Suites
Lens Type(s):Clear DR Acrylic with Internal Perforation
Frost High Impact Acrylic
Lamp Type(s):LED
Size(s):12"×12"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalReplaceable high-brightness ANSI 3000K, 3500K or 4000K LED array. 80 CRI minimum standard, 90 CRI available on 3000K lamp. Luminaire input 24V DC from remotemounted, 120-240V AC, high power factor power supply (MRIPS-312, ordered separately). Dimming capability controlled through compatible 0-10V dimmer (supplied by others). Dimming capability range 10% to 100%. MRI room EMI filter required (supplied by others).
Housing.032" aluminum. One-piece seam welded construction. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
Housing Flange.050" aluminum standard 4-piece construction, spot-welded to housing. Mitered and welded corners.
InstallationDesigned for 1" and Slot-T grid. Includes hardware to secure hanger wire.
Lamp ShieldingFully gasketed, sealed luminous shield of impact resistant DR acrylic. See Ordering Information for lens options.
ListingsUL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/ Non-Food Zone. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
PatentU.S. Patent No. 8,511,850.
Reflector/Lens Assembly.032" aluminum. One-piece seam-welded construction. Tool-free lamp access. White high reflectance (94%) low gloss TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Antimicrobial white high reflectance low gloss finish on exposed surfaces.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Warranty is void if all wiring is not completely shielded in grounded conduit.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top