| Electrical | Replaceable high-brightness ANSI 3000K, 3500K, or 4000K white LED array. High power factor dimmable driver; <20% THD. Male and female grounded connectors provided at ends of series-mount fixtures. See Options and Accessories for additional electrical capabilities. |
|---|
| Electrical Accessories | Wiring modules available with 15 amp hospital grade outlet or master switch. Construction and installation match fixtures. Cordsets: Custom-molded plugs,
SVT cord, snap-together design. Power cordsets connect to left side of fixture series; 120V wall outlet powered, 6 amps max. Interconnect cordsets electrically connect fixtures. Available in white or black finish. |
|---|
| End Caps/Covers | UV-stabilized, high-impact resistant, injection-molded white or black opaque polycarbonate. Black end caps/covers provided when silver finish (SL) is ordered. Light leak-preventing interlocking design. |
|---|
| Gasket | Closed-cell extruded EPDM gasket seals lens to end caps. |
|---|
| Housing | Extruded marine-grade aluminum. Nominal thickness: 0.06". Antimicrobial finish standard on housing and driver cover with MAUC series only. |
|---|
| Installation | External mounting feet allow installation without accessing internal compartments. Four-point mounting required for individual fixtures and initial fixture in series-mount run. Two-point mounting required for subsequent series-mount fixtures. UL fitting for 3/8" flexible conduit or NM wire supplied. Direct wire in rear of fixture uses push-in connectors behind quick-access cover. Direct wire into sides of fixture uses included adapter plate. Maximum current of series-runs 6 amps per circuit (see table at right). |
|---|
| Lens | UV-stabilized, high-impact resistant, extruded frost 100% DR acrylic. Smooth exterior, linear prism interior. Snap-in tool-less entry design. |
|---|
| Listings | UL and CUL listed for Damp Location. Cord-equipped models listed as Portable Luminaires. NSF2 Splash/Non-Food Zone for MAUC series only. Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. |
|---|
| Warranty | Lifetime Guarantee against defects in workmanship and materials (LED’s and Drivers excluded) for the product life of the original installation. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater. |
|---|