MedMaster Auracyl Sconce

Main Product ImageMAS_lenses.png
Model #: MAS838
  • Surface wall mount – 8"×38"
  • Sealed marine-grade extruded aluminum
  • Sealed backlighting creates a pleasing visual accent and NSF2 listing
  • Standard antimicrobial finish for cleanability
Application(s):Nursing Stations
Patient Rooms
Foyers and Lobbies
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Decorative Outer LensAcrylic translucent white lens standard. Nominal thickness .125". Optional decorative Lumicor® resins – see Ordering Information.
Electrical120-277V or 347V high power factor electronic fluorescent ballast (<10~25% THD). Replaceable high-brightness ANSI 3000k or 4000K white LED array with integral 120V electronic driver. LED dimming capability controlled through compatible 0-10V dimmer (supplied by others). 5%-100% dimming range.
HardwareOne stainless steel Phillips head fastener standard. Six stainless steel Phillips head fasteners with IP64 option. Internal brackets and fasteners are non-corrosive.
HousingMarine grade extruded aluminum. Marine grade die-cast aluminum end caps. TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours. Antimicrobial finish standard on exposed painted aluminum surfaces of installed luminaire.
Inner LensUV-stabilized, high impact resistant, extruded 100% DR acrylic frost lens. Nominal thickness .100". Lens secured in place by lens frame.
InstallationStandard six-point mounting required.
ListingsUL and CUL listed for Damp Location – covered ceiling and wall mount. NSF2 Splash/Non-Food Zone. ADA Compliant. Optional IP64 certified per IEC 60598. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Kenall certifies product by both Underwriters and Intertek Testing Laboratories.
Lumen DataMAS838 Lumen Data
PatentU.S. Patent No. 7,029,139; D610,294.
PhotometricsFor photometric information, go to www.kenall.com.
ReflectorDie-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.