MedMaster for Patient Rooms

Main Product ImageMAEC_HC001.png
Model #: MAEC
  • Ceiling mount – 8"×48"
  • One piece lens, dual function design
  • Asymmetric function for Exam
  • Symmetric function for Ambient/Reading
Application(s):Patient Rooms
Isolation Areas
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeHeavy duty extruded marine grade aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Phillips-head stainless steel fasteners secure door to housing- 6 with IB-AC and 2 with IBHD.Closed cell silicone gasket seals the doorframe to housing.
ElectricalLED: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA. LF: Two fluorescent rapid start electronic ballasts, high power factor (<10% THD). See Ordering Information for optional equipment. Lamps by others.
Housing20-gauge CRS; one-piece seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Inside Flanges18-gauge CRS, mitered and welded corners, spot-welded to housing before painting.
InstallationGRID MOUNT: Designed for 1" grid. Includes integral brackets for securing hanger wire. FLANGE MOUNT: supplied with install frame.
Lens.125" acrylic, one piece dual-function design. Linear prisms cover half of the lens to direct the exam light. Remaining lens is clear for maximum ambient optical performance. Lens sealed to extruded aluminum frame using a vinyl gasket.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone (IB-AC only).
MaintenanceAmbient lamp assembly rotates forward for accessibility during relamping. Large ambient reflector is easily removable for ballast maintenance.
PatentU.S. Patent No. D562,767 on Low Voltage Controller (LVC) option.
WarrantyLimited five (5) year warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Specification Sheets

Installation Files

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.