| Electrical | Serviceable high-brightness LED array. See Ordering Information for color temperature and CRI options. Maximum 3-step MacAdam color variation. 120-277, 347 or 480 VAC, 50/60Hz single-phase input; 0.90 PF. Minimum 90% electrical efficiency. Standard 0-10V dimming with 5-100% dimming range with dim-to-dark capabilities @ 0V (100µA maximum source current). EMC compliant with FCC 47 CFR Part 15, Class B. |
|---|
| Heatsink | Type 413 marine-grade die-cast aluminum. Coating to withstand 1,000-hour salt fog test per ASTM B117. Electrically insulated from outer housing to prevent galvanic corrosion. |
|---|
| Housing | 18-gauge, die-formed outer housing with convection cooling of internal heat sink via perforated cooling apertures – see Ordering Information for pattern options. Type 3003-H14 aluminum, Type 304 or Type 316 stainless-steel material options. Passivation of all welded stainless-steel components. TGIC polyester powder-coat finish with five-step pre-treatment process; coatings to withstand 1,000-hr salt fog test per ASTM B117. |
|---|
| Installation |
Four-point (wall mount) or six-point (pendant mount) mounting to suitable surface, hardware by others. Suitable for continuous use in -30°C to 40°C ambient environments for 92L/184L lamp power levels and -30°C to 30°C ambient environments for 130L/260L lamp power levels. Light engine (primary optics, LEDs, heat sink and driver) are field-replaceable as a sub-assembly.
|
|---|
| Listings |
Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. Light engine and electronic components are sealed to an IP65 rating per IEC 60598. RoHS compliant.
|
|---|
| Mounting | Ceiling-Pendant: Compatible with flat or sloped ceilings up to 4:12 pitch. Ceiling canopy and pendants to match housing material and finish. Supply wiring at canopy via either recessed junction box or surface-mounted ¾” conduit (1-in, 1-out). Provided cord routed internal to pendant stems. Standard pendant length is 72” with custom pendant lengths available. Wall: 16-gauge, die-formed yoke bracket attaches to vertical wall surface over recessed junction box. Material and finish to match housing. Supply and control wiring fed between junction box and housing via exposed jacketed cable and sealed cord-grip. Cabling is white for all light-colored finishes and black for all dark-colored finishes. |
|---|
| Optics | Forward-, narrow-forward and wide-throw optical distributions. Clear tempered glass outer lens with silicone gasketing. Optional cut-off shield (CS) to limit high-angle spectator glare. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com. |
|---|
| Pivot Hub | Machined hubs attach the housing to the ceiling pendants or wall-mount yoke and allow for repeatable rotational aiming and locking. Range of aiming adjustment is -15° to 55° (0° is luminaire pointing straight up). Construction in 6061 aluminum (AL housings) or 904L stainless-steel (304 and 316 housings). |
|---|
| Warranty | Limited five (5) year mechanical warranty on aluminum, ten (10) year limited mechanical warranty on 304 stainless and fifteen (15) year limited mechanical warranty when ordered with 316 stainless. Five (5) year limited warranty on light engine components. |
|---|