•  

HSESO24

SimpleSeal

HSESO24 Main Image
HSESO24 Main ImageAircraft CableFastener DetailFulcrum BracketSwing-out ArmsHermetically Sealed Housing
Model #: HSESO24
Features:
  • Surface ceiling mount – 2'×4'
  • One-piece overlapping doorframe secured to housing with aircraft cables
  • 20-gauge, hole-free one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D, Class II, Division 2, Groups F, G and Class III.
Application(s):Hazardous Locations
Lens Type(s):.125" #12 Prismatic Polycarbonate
.125" Clear Polycarbonate
.156" Textured Tempered Glass
Specified Lens
.125" High-Impact Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
Lamp Type(s):LED
Linear Fluorescent
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge CRS. One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and  (12) for 2×4 captive flush mounted Phillips head stainless steel fasteners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe Gasket one-piece closed cell extruded silicone gasket seals doorframe to housing.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<15% THD, >0.90 PF). Standard 0-10V dimming with 15-100% range. 500 μA maximum source current. See page 2 for T Code rating and maximum ambient temperature. Consult factory for flourescent options.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationFour .312" holes for surface mounting. See Options for pendant mounting.
Lens.125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T).
ListingsLED: Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location and Hazardous Locations Class I, Division 2 Groups A,B,C,D, and IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Fluorescent: UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F, G (and Simultaneous Presence); and Class III.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links

Buy American Act Compliant
Our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top