Skip to Content
Kenall Manufacturing - Homepage
Main Content

HSECO14

SimpleSeal

HSECO14 Main Image
HSECO14 Main ImageAircraft CableFastener DetailFulcrum BracketSwing-out ArmsHermetically Sealed Housing
Model #: HSECO14
Features:
  • Surface corner mount – 1'×4'
  • 20-gauge, hole-free one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D, Class II,
  • Division 2, Groups F, G and Class III.
Application(s):Hazardous Locations
Lens Type(s):.125" #12 Prismatic Polycarbonate
.125" Clear Polycarbonate
.250" Textured Tempered Glass
Specified Lens
.125" High-Impact Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
Lamp Type(s):Linear Fluorescent
Size(s):12"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-Gauge CRS. One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and 10 captive flush mounted Phillips head stainless steel fasteners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe Gasket one-piece closed cell extruded silicone gasket seals doorframe to housing.
ElectricalQuantity and type as specified - see ordering information. All ballasts UL listed class P. Wireway hole provided with hub/ring assembly. See Ordering Information for alternate or multiple ballasts and optional equipment. Lamps by others.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationFour .312" holes for surface mounting.
Lens.125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T).
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F, G; and Class III.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

top