Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

HASESI24

SimpleSeal

HASESI24 Main Image
HASESI24 Main ImageSimpleSeal_declare_HS02.png
Model #: HASESI24
Features:
  • High-output lamp sources for accurate color rendition and lighting performance
  • Diffused high-efficiency lens for reduced glare
  • Surface ceiling mounting in 1'×4', 2'×2', 2'×4' sizes
  • One-piece inset doorframe, secured to housing with continuous piano hinge and Torx® fasteners
  • Peace of Mind Guarantee™ against breakage
Application(s):Locker Rooms
Cafeterias
Restrooms
Stairwells
Storage Facilities
Corridors
Sally Ports
Exteriors and Entryways
Natatoriums
Lens Type(s):.187" Prismatic Polycarbonate
Specified Lens
Symmetric, Diffused DR Acrylic inside lens .250" Clear Polycarbonate outside lens
Lamp Type(s):LED
Size(s):24"×48"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 660 µA maximum source current.
Housing18-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationAdjustable swing-out mounting brackets standard. See options for pendant mounting holes. Standard with side feed hole, see options for Top Wiring Access (TWA).
LensSee Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. ­Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratory for Wet Location installations. ETL certified IP65 per IEC60598. CCEA approved. HASESI is participating in Declare.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com
WarrantyLimited five (5) year LED warranty.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top