Skip to Content
Kenall Manufacturing - Homepage
 
Main Content

HASEDI14

SimpleSeal

HASEDI14 Main Image
HASEDI14 Main ImageAircraft CableFulcrum BracketSimpleSeal_declare_HS02.pngSwing-out ArmsHermetically Sealed Housing
Model #: HASEDI14
Features:
  • High-output, high-CRI LED lamp sources for accurate color rendition and lighting performance
  • Diffused high-efficiency lens for reduced glare
  • Recessed ceiling mount; grid or flange - 1'×4'
  • Suitable for universal installation into 1.0" and 1.5" grid or flange (drywall) ceilings
  • One piece sealed housing with smooth exterior doorframe and lens for simplified cleaning protocols
Application(s):Locker Rooms
Cafeterias
Restrooms
Stairwells
Storage Facilities
Corridors
Sally Ports
Exteriors and Entryways
Natatoriums
Lens Type(s):.187" Prismatic Polycarbonate
.250" Clear Polycarbonate
Specified Lens
Lamp Type(s):LED
Size(s):12"×48"
Listings:        
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Lens frame secured to housing with continuous hinge and 3 tamper-resistant stainless steel Torx® with center pin fasteners.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 660 µA maximum source current.
Housing20-gauge CRS. Hole-free, one-piece, seam-welded construction. Integral aluminum heat sink for thermal dissipation. 18-gauge housing flange with mitered and welded corners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationAdjustable swing-out mounting brackets standard.
LensSee Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. ­Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved. HASEDI is participating in Declare.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com.
WarrantyLimited five (5) year warranty.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top