Skip to Content
Kenall Manufacturing - Homepage
Main Content

HADL4S-ICT

Millenium Downlights

HADL4S-ICT_HS01.png
HADL4S-ICT_HS01.png
Model #: HADL4S-ICT
Features:
  • 4" sealed, recessed downlight with flush trim, round or square aperture
  • Provides on-demand environmental disinfection via LED light
  • Single, white disinfection mode
  • Independent laboratory tested to kill harmful bacteria, including Staph*, such as MRSA**
  • Peace of Mind Guarantee® against breakage
Application(s):Parks and Recreation
Locker Rooms
Multifamily Housing
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Natatoriums
Canopy
Lens Type(s):.125" Clear Polycarbonate
Lamp Type(s):LED
Size(s):4" Aperture
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical
Single, white disinfection mode. Serviceable white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperature with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120, 277 and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 0.2mA maximum source current. Optional eldoLED ECOdrive DALI-2/LEDcode2 driver with 1-100% range. 
HeatsinkDie-cast aluminum with external radial fins for natural convection.
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratory for non-IC and Wet Location installations. IP65 rating per IEC60598. Optional CCEA compliance. EPA Est. No. 99283-WI-1.
OpticalDiffused tempered-glass upper lens. 1/8" clear polycarbonate flush lens at ceiling trim with continuous seal to trim ring. Available with various reflector finishes. See Ordering Information for available options.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric information, go to www.kenall.com.
Rough-In Frame18-gauge die-formed, corrosion-resistant steel. Vertically adjustable collar accommodates ceiling thicknesses up to 1.5", adjustable post-installation. Adjustable mounting bars for installation with wood and steel frame joists and T-grid ceiling systems spaced up to 24" on center. Quick-access junction box accessible post-installation from above and below ceiling. Includes (5) 1/2" knock-outs to allow straight conduit runs.
Trim/Housing Section IP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Flush lens trim secured with three (Round) or four (Square) Torx® tamper-resistant, captive fasteners. Closed-cell gasketing at ceiling flange. See Trim Ordering Information for available options.
WarrantyLimited five (5) year LED warranty. Peace of Mind Guarantee against breakage.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

top