Skip to Content
Kenall Manufacturing - Homepage
Main Content


Herculux for Institutional High Abuse

H1212FL Main Image
H1212FL Main Image
Model #: H1212FL
  • Surface mount – ceiling; 12"W×12"L×5"D
  • Heavy duty cold rolled steel or aluminum baseplate
  • One-piece, UV-stabilized polycarbonate lens
  • Peace of Mind Guarantee® against breakage
Application(s):Parks and Recreation
Multifamily Housing
Dorm Rooms
Schools and Universities
Sally Ports
Exteriors and Entryways
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate16-gauge CRS. White TGIC polyester powder coat – 5-step pre-treatment. Salt spray test: 1,000 hours. Reflectance: 92%. Baseplate provided with four-point mounting holes and one wireway hole. See Ordering Options for marine grade aluminum baseplate (AL). For LEL-SA option, standard dark bronze TGIC polyester powder coat – 5-step pre-treatment. See Ordering Information for optional finishes.
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketDie-cut closed cell neoprene gasket seals lens/housing to mounting surface. H1212EL: Lens inset into baseplate and sealed with one “O” ring closed cell silicone gasket.
HardwareFour stainless steel Torx® with center pin fasteners secure lens to baseplate. H1212EL: Shoulder fastener design and washer prevent lens/eyelid stress due to over torquing.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
LensOne-piece wraparound lens (UV-stabilized, high impact, virgin injection molded polycarbonate). Smooth exterior, prismatic interior. Nominal thickness: 0.125".
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources