Skip to Content
Kenall Manufacturing - Homepage
Main Content

H1212DSD

Herculux for Institutional High Abuse

H1212DSD Main Image
H1212DSD Main Image
Model #: H1212DSD
Features:
  • Surface ceiling mount – nominal 17"W×17"W×9"D
  • Fully shaded visor
  • One-piece heavy duty die-cast housing
  • UV-stabilized, injection molded polycarbonate lens
  • Stainless steel Torx® fasteners
Application(s):Parks and Recreation
Multifamily Housing
Walkways
Stairwells
Schools and Universities
Exteriors and Entryways
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):12"×12"
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA. Optional embedded microwave motion sensor (MS) has factory default settings of 20 minute time out, dims down to 30%.
GasketDie-cut closed cell neoprene gasket seals housing to mounting surface. Lens inset into housing and sealed with one “O” ring closed cell silicone gasket.
HardwareFour stainless steel Torx® with center pin fasteners secure lens/visor to housing.
HousingOne-piece heavy duty die-cast, low-copper aluminum housing. Housing flange interlocks around lens producing maximum moisture deflection and resistance to prying. Housing provided with four standoff mounting holes. One 3/4" IPS tapped hole on back of housing. Two 3/4" IPS tapped and plugged holes on sides of housing – see Cross Section/Details. Standard housing in dark bronze TGIC polyester powder coat – 5-stage pre-treatment.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
LensOne-piece wraparound lens (UV-stabilized, high impact, virgin injection molded polycarbonate). Smooth exterior, prismatic interior. Nominal thickness: 0.125".
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. 
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
ReflectorHigh reflectance painted aluminum.
VisorOne-piece injection molded opaque dark bronze polycarbonate (UV-stabilized). Optional finishes to match housing. Nominal thickness .125". Visor allows for full-cutoff light output.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

top