Millenium Finite Cutoff for Architectural High Abuse

FN6 Main Image
FN6 Main Image
Model #: FN6
  • 12" and 24" high-output surface wall-pack
  • Optical distribution options with full cutoff, suitable for path of egress lighting
  • Optional embedded motion sensor
  • Peace of Mind Guarantee® against breakage
Application(s):Parks and Recreation
Multifamily Housing
Dorm Rooms
Exteriors and Entryways
Lens Type(s):Clear Prismatic Polycarbonate
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ControlsOptional embedded microwave motion sensor (MS) has factory default settings of 20 minute timeout with 30% dimming.  Compatible with Kenall TekLink™ TL100 control system.
Driver120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<20% THD, >0.90 PF).  Minimum 85% driver efficiency.  Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities; 330 µA maximum source current.
HousingMarine-grade aluminum with extruded body and die-cast end caps.  Post-assembly TGIC polyester powder coat finished with 5-step pre-treatment process.
Installation16-gauge stainless steel plate attaches to the wall surface (fasteners by others).  Luminaire attaches to mounting plate via quick-mount hook and locked into place with a captive Torx® (or optional Philips) head screws, which are concealed but accessible from the bottom of the luminaire. Suitable for -30°C - 40°C ambient temperature environments, unless otherwise noted.
LED ModuleServiceable high-power LED array.  See Ordering Information for available color temperature and CRI options.  Maximum 5-step MacAdam variation allowance.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location installations.  IP64 rating per IEC60598.
OpticalType II, III, IV and 5N utilizing secondary optics with a clear UV-stabilized polycarbonate tertiary lens.
WarrantyLimited five (5) year LED warranty.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Product Documentation

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.