•  

FES12

EnviroSeal for Food Processing

FES12 Main Image
FES12 Main ImageEnviroseal Pendant MountEnviroseal RelampEnviroSeal Continuous Row MountEnviroSeal Shock-resistant Socket
Model #: FES12
Features:
  • Ceiling or wall mount – 12"×24", 12"×36", 12"×48", 12"×72", 12"×96"
  • One-piece 20-gauge housing with UV-stabilized polycarbonate lens
  • IP65 option available
  • For Hazardous applications please refer to the HES series
Application(s):Kitchen and Food Prep
Cafeterias
Cold Storage Freezers
Meat Processing Facilities
Industrial Food Processing Facilities
Manufacturing
Food Processing
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Size(s):12"W
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalClass P ballast. Fluorescent electronic 120/277 or 347 voltage ballasts, high power factor. Optional one-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp. Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 10-100% range, maximum driver source of 500 μA.
FinishBrushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%.
HardwareTwo Type 302 stainless steel Phillips head fasteners secure lens in housing channel.
HousingOne-piece, seam-welded 20-gauge CRS. Base provided with two-point mounting holes and one wireway hole. Lens is positioned in baseplate channels and retained with stainless steel fastener(s). Base mounts flush to ceiling or wall surface.
Lens/GasketUV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". Linear silicone gasket to seal doorframe to housing.
ListingsUL and CUL listed for Wet Location – ceiling mount covered ceiling. UL and CUL listed for Damp Location – horizontal wall mount. Optional UL certified IP65 in compliance with IEC 60598 (IP65 Option) – ceiling mount. NSF2 Splash/Non-Food Zone. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory.
Lumen DataFES12 Lumen Data
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyFour-point mounting, polycarbonate lens and Torx® with center pin fastener required
for Peace of Mind Guarantee®. One (1) year warranty against defects in materials and workmanship.
Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation
of 30% or greater.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.

 

A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top