Skip to Content
Kenall Manufacturing - Homepage
Main Content



Model #: CSSGI24
  • Suitable for ISO 5-8 cleanroom spaces
  • Recessed grid installation - 2x2 and 2x4 size options
  • Edge-lit LED light engine for minimal luminaire intrusion into the plenum space (<2.0" depth)
  • Anodized extruded aluminum inset door construction allows for room-side servicing
  • High-output, high-CRI LED lamp sources provide up to 8,600lm output
Research and Development
Food Processing
Healthcare Pharmacies
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ControlsOptional embedded microwave motion sensor mounted behind light guide panel. Remote adjustment for dim level, timeout period and sensor sensitivity settings. Factory default is 30% dimming and 20min. timeout. Sensor operates at 5.8 GHz (continuous-wave radar) and provides 360° coverage at various mounting heights and coverage areas. 
DoorframeExtruded 6063-T5 aluminum construction with clear anodized finish as standard. Optional TGIC polyester powder coat finish in Gloss White. Doorframe serves as integral heat sink to the edge-lit LED light engine. Secured to housing via aircraft cables and flush-mounted Phillips-head fasteners. 
ElectricalAvailable 3000K, 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. Standard min. 80 CRI, optional min 90 CRI. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.90 PF). Standard 0-10V dimming with 10-100% range without dim-to-dark capabilities; 0.4mA max. source current per luminaire. Optional 0-10V dimming to 1% with dim-to-dark capabilities; 0.2mA max. source current per luminaire. Optional DALI-2 DT6 driver with 1-100% dimming range without dim-to-dark capabilities.
HousingPrecision-formed 24-gauge cold rolled steel. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationSuitable for Type-IC recessed ceiling installation into 9/16" and 15/16" lay-in grid ceilings. Wire access panel on rear of housing allows wire connections without door removal. See Accessories for adapter kit for drywall ceiling installation. Suitable for -20°C to 40°C ambient environments, unless otherwise noted.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Indoor Wet Locations. NSF2 Splash/Non-Food Zone. CCEA Approved. Suitable for ISO5-8 cleanroom environments.
OpticsEdge-lit, laser-etched light guide panel in acrylic with high-efficiency backing reflector. Outer diffuser in acrylic.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to
WarrantyLimited five (5) year LED warranty.