| Driver/Controls |
120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current drivers (<20% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 0.4mA maximum driver source current. Serviceable from above or below ceiling structure.
|
|---|
| Finish | All painted metal surfaces finished after fabrication in gloss white TGIC polyester powder coat with 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Housing | Internal housing and room-side ceiling flange constructed of seam-welded, die-formed 18-gauge CRS. Walkable side ceiling flange constructed of die-formed and seam-welded 16-gauge CRS, secured to housing during installation with provided hardware dependent on ceiling thickness. See Ordering Information for ceiling thickness selection - for use with 2"-4" ceiling systems. |
|---|
| Installation | Recessed installation into 2", 3" or 4" thick modular structural ceiling panels. One 7/8" KO on each side of housing for conduit runs internal to ceiling system. One 7/8" KO on top of luminaire for vertical conduit entry into luminaire, or horizontal surface run conduit entry via TCE option which provides a surface junction box and sealed feed into luminaire. Tested to 900lbs of uniform loading without damage or deflection of the luminaire structure. Suitable for -30°C to 40°C ambient environments, unless otherwise noted. |
|---|
| LED Module | Serviceable back-lit LED array. Native 590 nm Amber, 630 nm Red and 660 nm Deep Red (non phosphor-converted) LED options. Narrow bandwidth native sources provide optimal control over spectral emissions. Available as single native color or separately circuited native color and white lamping. Standard 90CRI min. (R9>50). See Ordering Information for available color temperature options. Serviceable from above or below ceiling structure. |
|---|
| Lens |
High impact diffuse acrylic lens, nominal .125" thick. Sealed to perimeter ledge of door aperture using RTV silicone and secured with continuous brackets.
|
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for recessed ceiling insulation contact (IC-rated) and Indoor Wet Location installations. IP66 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. For use in spaces that are ISO 14644-1 rated ISO3-9. Build America, Buy America Act. Compliant. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard. For additional photometric data, please go to www.kenall.com. |
|---|
| Room-side Door | Standard one-piece, 18-gauge Type 304 stainless steel with 4B brushed finish. Other materials available. Die-formed with welded corners and a 60° progressive perimeter bend construction. Secured by countersunk flush-head stainless steel screws. Self-retracting safety cable supports doorframe during room-side servicing. |
|---|
| Top Access Door | 16-gauge door with welded stiffening rails and die-formed perimeter. One-piece, closed cell extruded Nitrile gasketing seals doorframe to housing. Secured to housing with stainless steel counter-sunk flush-head screws. Single, hinged D-ring flush with walkable surface provides lifting point. Closed cell silicone gasket seals door to housing. Provides access to service all internal electrical components. |
|---|
| Warranty | Limited five (5) year LED warranty. |
|---|