| Doorframe | Heavy duty extruded marine grade aluminum with anodized finish. Continuous angle lens retention system. Mechanical guide for Doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and (10) captive flush mounted Phillips head stainless steel fasteners. |
|---|
| Doorframe Gasket | One-piece closed cell extruded nitrile gasket seals Doorframe to housing. |
|---|
| Electrical | Available 3000K, 3500K, 4000K and 5000K color temperatures, 82 CRI; maximum 3-step MacAdam variation allowance. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); 330µA maximum source current. Consult factory for fluorescent options.
|
|---|
| Housing | 20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. |
|---|
| Installation | Four .312" holes for surface mounting. See Options for pendant mounting holes. |
|---|
| Lens | .125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T). |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location. UL Classified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 1(ISO 3) Cleanrooms. |
|---|