| Doorframe | 18-gauge CRS standard. See Ordering Information for optional material selections. One-piece inset construction welded corners. TGIC polyester powder coat finish in standard white or optional black, with five-stage pre-treatment. Antimicrobial finish optional on all exposed painted components of installed luminaire. Doorframe secured to housing with aircraft cables and 8 captive mounted Phillips-head stainless steel fasteners. Closed cell Neoprene/EPDM/SBR gasket seals doorframe to housing. |
|---|
| Electrical | High-brightness, 6500K LED light source. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (0.95 PF). Standard 0-10V dimming with 1-100% range; 250μA maximum source current. EMC meets FCC Part 15, Class A limits. |
|---|
| Housing | 20-gauge CRS standard. See Ordering Information for optional material selections. Hole-free one-piece seam welded construction. TGIC polyester powder coat finish in standard white or optional black, with five-stage pre-treatment. Salt spray test: 1,000 hours. Flange/Surface mounting – antimicrobial finish optional on all exposed painted surfaces of installed luminaire. |
|---|
| Installation | Surface Mount: Four .312" diameter holes. Grid Mount: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). Flange Mount: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets. |
|---|
| Lens | .125" acrylic lens sealed to doorframe with silicone sealant. .125" white acrylic diffuser provides uniform surface illuminance. All lenses secured with continuous lens retention system. |
|---|
| Listings | UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. |
|---|
| Regressed Frame Kit | One-piece, .08" thick, seamless aluminum construction TGIC polyester powder coat finish in matte white or black. Provides easy-to-install, architectural skylight effect by raising fixture 2-inches above standard 1" or 1.5" T-bar grid ceiling. |
|---|