| Driver/Controls | Available with 120-277VAC, 50/60Hz or 24VDC input configurations. Remote power supply accessory allows for powering multiple units from central source. The product can be built with external 0-10V dimming or integral capacitive touch dimming at the housing surface. 0-10V dimming has 1-100% range with dim-to-dark capabilities and follows a logarithmic dimming curve. If ordered with capacitive touch, then step dimming increments are 100% / 33% / 10% / 0%. |
|---|
| Housing | One-piece, die-cast aluminum outer housing. TGIC polyester powder coat finish with five-stage pre-treatment. Standard anti-microbial matte white finish. See Ordering Information for optional finishes, including custom color in any RAL number. |
|---|
| Installation | Standard installation requires the mounting plate to be mounted to a vertically oriented NEMA single-gang junction box (supplied by others). High-abuse and High-risk Behavioral Health applications should be ordered with the Reinforced Mounting Hardware Kit (HD) allowing for direct attachment to the wall structure through the junction box. Housing assembly attaches to mounting plate with upper hook and two (2) 8-32 counter-sunk tamper-resistant Torx® fasteners. |
|---|
| LED Module | Serviceable high-power LED. Standard 90CRI min. (R9 > 50). See Ordering Information for standard color temperature options. Consult factory for custom lamp color availability. |
|---|
| Listings | Luminaire is certified to UL standards by Intertek Testing Laboratory for Indoor Wet Location installations. IP65 rating to IEC60598. Remote driver accessory is UL and CUL Listed Class P. NSF2 Splash/Non-Food Zone. ADA Compliant. Luminaire tested to an IK10 impact protection rating per IEC 60068-2-75:1997-08. |
|---|
| Optics | Diffused .250" polycarbonate lens with outer surface installed flush with exterior surface of housing. Continuous circumferential seal and retention to housing. Available optical distributions in narrow focused (F) and wide beam / lambertian (W) patterns. |
|---|
| Photometrics | Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. |
|---|
| Warranty | Limited five (5) year LED warranty. |
|---|