|Optional integral low-voltage controller with and without dimming (LVCD and LVC, respectively) capability through a compatible wall, bed or pillow speaker controller. When ordered in conjunction with the night light option, the low-voltage controller powers and controls the night light. Refer to hyperlinks within the Ordering Information for further details. See ‘Accessories’ for available low-voltage wall control switches.
120-277VAC or 347VAC, 50/60Hz electrical input with serviceable constant-current driver (<10% THD, >0.90PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities (non dim-to-dark with 347V); maximum 330 µA maximum source current. Optional 0-10V dimming with 0.1%-100% range and dim-to-dark capabilities via eldoLED SOLOdrive series driver (n/a 347V input; ≤0.5V required from dimming control for dim-to-dark operation; 400µA max. source current). Optional eldoLED ECOdrive DALI drivers with 1-100% range. Optional Dual Circuit power and control wiring provides the ability to independently switch the up- and down-lighting functions. Standard configuration is for Single Circuit power and control wiring.
|Extruded 6063-T5 aluminum construction with die-cast aluminum end caps. Low-gloss anti-microbial white TGIC polyester powder-coat finish with five-stage pre-treatment. Formed 14-gauge CRS baseplate secures the housing assembly to the mounting surface.
|Surface wall-mount installation over a recessed junction box. Internal mounting holes (hardware provided by others). Housing assembly attaches to baseplate via countersunk temper-resistant Torx fasteners. Suitable for 0°C to 25°C ambient temperature environments.
|Serviceable mid-power LED array. Minimum 82 CRI standard (R9 >20). See Ordering Information for available color temperature options. Maximum 3-step MacAdam variation allowance.
|Luminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location installations. Dust-tight to IP6x per IEC 60598 standard. NSF2 Splash/Non-Food Zone.
Diffused polycarbonate lens for up-light and down-light lamping. Isolated optical compartments prevent light-bleed between lamping functions. 3/16” nominal lens thickness with continuous lens retention.
|Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
|Limited five (5) year warranty.