Skip to Content
Kenall Manufacturing - Homepage
Main Content

MRIRS4

MedMaster MedSlot

MRIRS4_HS01.png
MRIRS4_HS01.png
Model #: MRIRS4
Features:
  • 4" recessed linear slot luminaire in multiple lengths
  • Single-function luminaire provides ambient lighting within the patient room
  • Symmetric and 15o asymmetric optical distribution options
  • No visible room-side fasteners for clean aesthetic
  • High-output, high-CRI LED lamp sources
Application(s):MRI Imaging Suites
Surgical Suites
Lamp Type(s):LED
Listings:       
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Driver/ControlsLuminaire input 24VDC from remote-located 120-277VAC, high-power-factor power supply with EMI filter. Dimming line EMI filter required if utilizing dimming function. Internal non-switch mode DC-DC driver. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. See below for ordering information.
HousingExtruded 6063-T5 aluminum construction with aluminum endcaps. Low-gloss anti-microbial white TGIC polyester powder-coat finish with five-stage pre-treatment. Non-ferrous components and hardware.
InstallationSuitable for Type-IC recessed ceiling installation into 9/16" and 15/16" lay-in and tegular grid ceilings, flanged drywall ceilings and trimless mud-in installations with 5/8" drywall. All power and signal wiring must be in completely grounded aluminum conduit. Light engine and internal driver are replaceable post-installation.  MRI room EMI filters required (see Accessories below).  Suitable for 0°C to 25°C ambient temperature environments.
LED ModuleServiceable mid-power LED array. Minimum 82 CRI standard (R9>20). See Ordering Information for available color temperature options.
Listings
Luminaire is certified to UL standards by Intertek Testing Laboratories for Type-IC and Wet Location installations. IP65 rating per IEC60598. NSF2 Splash/Non-Food Zone rated. Standard CCEA compliance. Meets FED-STD-209E/Class 1 (ISO 3) Cleanrooms. Compliant with MIL-STD 461G for radiated and conducted emissions.
OpticsSymmetric (Lambertian) distribution. Snap-in, one-piece extruded frost DR acrylic diffuser.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For detailed photometric information, please visit www.kenall.com.
WarrantyLimited five (5) year warranty.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top