Skip to Content
Kenall Manufacturing - Homepage
Main Content



HSESO14 Main Image
HSESO14 Main ImageAircraft CableFastener DetailFulcrum BracketSwing-out ArmsHermetically Sealed Housing
Model #: HSESO14
  • Surface ceiling mount – 1'×4'
  • One-piece overlapping doorframe secured to housing with aircraft cables
  • 20-gauge, hole-free one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Class I, Division 2, Groups A, B, C, D Hazardous Location Listing
Application(s):Hazardous Locations
Lens Type(s):.125" #12 Prismatic Polycarbonate
.125" Clear Polycarbonate
Symmetric, Diffused DR Acrylic
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge CRS. One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and  (10) for 1×4 captive flush mounted Phillips head stainless steel fasteners. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe Gasket one-piece closed cell extruded silicone gasket seals doorframe to housing.
ElectricalAvailable 3500K, 4000K and 5000K color temperatures with maximum 3-step MacAdam variation allowance. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<15% THD, >0.90 PF). Standard 0-10V dimming with 15-100% range. 500 μA maximum source current. See page 2 for T Code rating and maximum ambient temperature. Consult factory for flourescent options.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationFour .312" holes for surface mounting. See Options for pendant mounting.
LensSymmetric optic includes diffused, impact-resistant acrylic lens.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for Wet Location and Hazardous Locations Class I, Division 2 Groups A,B,C,D, and IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. FED-STD-209E/Class 100 (ISO 5) Cleanrooms.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources