Technical Specifications
Doorframe | 18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. Doorframe secured to housing with continuous hinge and (2) for 2×2 tamper-resistant stainless steel Torx® with center pin fasteners. Doorframe Gasket closed cell extruded silicone gasket seals doorframe to housing. |
---|
Electrical | Fluorescent electronic ballasts (<10% THD). Lamps by others. See Electrical Options for additional options. |
---|
Housing | 20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.Housing Flange 20-gauge CRS. Mitered and welded corners and spot-welded to housing. |
---|
Installation | 1.0" and 1.5" T-Bar installation standard. See Options for T-Bar clips. Consult factory for custom T-Bar ceilings. |
---|
Lens | See Lens Options below to specify lens material. Lens sealed to doorframe with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. Minimum .187" polycarbonate lens required (max. .375") for Peace of Mind Guarantee®. |
---|
Listings | UL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. CCEA approved. |
---|
This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.