Skip to Content
Kenall Manufacturing - Homepage
Main Content

CSEGL24

SimpleSeal

CSEGL24 Main Image
CSEGL24 Main ImageFastener DetailFulcrum BracketOverlapping DoorframeSwing-out ArmsHermetically Sealed Housing
Model #: CSEGL24
Features:
  • Recessed; grid mount for 1.5"and 2.0" T-Bar – 2'×4'
  • Extruded aluminum extended flange
  • One-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure
Application(s):Pharmaceutical
Kitchen and Food Prep
Biosafety and Containment
Anterooms
Vivariums
Cleanrooms
Containment Areas
Laboratories
Research and Development
Meat Processing Facilities
Lens Type(s):.125" #12 Prismatic Polycarbonate
.125" Clear Polycarbonate
.250" Textured Tempered Glass
Specified Lens
.125" High-Impact Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
UV Filtering (Specify)
Lamp Type(s):Linear Fluorescent
Size(s):24"×48"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeHeavy duty extruded marine grade aluminum with anodized finish. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners (12) for 2×4.
Doorframe GasketOne-piece closed cell extruded nitrile gasket seals doorframe to ceiling structure.
ElectricalElectronic ballast <10% THD standard. See Ordering Information for alternate or multiple ballasts, sealed wireway and optional equipment. Lamps by others.
Housing20-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5-step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Installation1.5" and 2.0" T-Bar installation standard. See Options for T-Bar clips and earthquake clips. Consult factory for custom T-Bar ceilings.
Lens.125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections. If required, specify lens overlay combinations inner/outer (Example: R/T).
ListingsUL and CUL Listed for Wet Locations. UL Classified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved. Meets Standard for luminaire FED-STD-209E/Class 100 (ISO 5) Cleanrooms.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

Additional Resources

top