Sentinall for Institutional High Abuse

S711D Main Image
S711D Main Image
Model #: S711D
  • Surface wall mount – 7"W×11"W×4"D
  • 18-gauge cold rolled steel baseplate
  • UV-stabilized, injection molded polycarbonate lens
  • Peace of Mind Guarantee® against breakage
Application(s):Parks and Recreation
Multifamily Housing
Schools and Universities
Foyers and Lobbies
Lens Type(s):Pearlescent
Lamp Type(s):LED
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate18-gauge CRS, provided with four-point mounting holes and one wireway hole. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. See Options or Accessories for marine grade aluminum base (AL), surface conduit adapter (SA), and aluminum surface conduit adapter (ASA).
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketDie-cut closed cell neoprene gasket seals lens/housing to mounting surface.
HardwareOne stainless steel Torx® with center pin fastener secures lens/housing to base.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
Lens/HousingOne-piece wraparound lens/housing. UV-stabilized, high impact, virgin injection molded polycarbonate. Housing section available in Matte White or Dark Bronze finish.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. ADA compliant.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
ReflectorFull reflector/wire cover (92% reflectivity).
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.