•  

SPG18

SenScape

Main Product ImageSPG-side-no-shieldSPG18-top-no-shieldSPG18-top-shieldSPG18-bottom-lens
Model #: SPG18
Features:
  • Textured tertiary lens for glare reduction and up-light feature to eliminate “cave-effect”
  • Outputs ranging from 3,455 lm to 11,728 lm
  • Compatible with TekLink™ lighting control technology
  • 10 Year limited product warranty
Application(s):Parking Garage
Gymnasiums and Multipurpose Rooms
Canopy
Lens Type(s):Textured Acrylic
Textured Polycarbonate
Lamp Type(s):LED
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalArrayed backlit mid-power LED light source. See Ordering Information for color temperature and CRI options. 70 CRI minimum. 120-277 VAC, 347VAC and 480VAC 50/60Hz single-phase input; constant-current dimming driver; <10% THD, >0.95 PF. Minimum 83% electrical efficiency. 0-10V dimming protocol with 1-100% range, 0.2mA source current. Replaceable surge suppressor rated to 20kA/kV per IEEE/ANSI C62.41 Cat. A. EMC compliant with FCC 47 CFR Part 15, Class B. Passes IEC 61000-4-4 EFT and IEC 61000-4-5 (Class 4) surge evaluation.
HousingMarine-grade die-cast aluminum and UV-stabilized polycarbonate construction. Standard TGIC polyester powder coat finish on aluminum components with five-step pre-treatment to withstand 1,000 hour salt spray test per ASTM B117. See Ordering Information for available finishes. Closed-cell silicone gasketing seals all housing component interfaces.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598 standard with optional IP66 rating. Suitable for installation into -40°C to 40°C ambient environments, unless otherwise noted.
MountingDirect-to-Surface (DTS) and Quick-Mount (QM) mounting over recessed junction box, Trunnion Mount (TK) or pendant-mounted (PM) via ¾" rigid sealed conduit. See Ordering Information for selection.
OpticalType V-Square and V-Narrow roadway distributions. Multiple uplight options optically coupled to primary light source requires no additional electrical power to provide function. UV-stablilized, high-impact resistant injection-molded clear textured polycarbonate or DR acrylic tertiary lens.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For photometric data, please go to www.kenall.com.
TekLink TL100Centralized, wired zonal occupancy and closed-loop daylight harvesting control system. TL100 controllers are standalone devices and ordered separately from luminaire.
TekLink TL1000/2000An adaptive lighting control system with wired or wireless communication between system nodes. In addition to occupancy detection and daylight harvesting, TL1000 and TL2000 feature advanced scheduling and energy management capabilities with cloud-based management of system settings, reporting and notifications.
TekLink TL50An independent lighting control system integral to the luminaire, featuring its own embedded occupancy sensor and adjustable time-out/dimming settings. TL50DM adds a closed-loop daylight harvesting function for maximum energy savings.
WarrantyLimited ten (10) year warranty. Peace of Mind Guarantee™ when ordered and installed with direct-to-surface (DTS) mounting and polycarbonate lens (TP).

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top