•  

RHR15D

Rough-house for Institutional Rough Service

Main Product Image
Model #: RHR15D
Features:
  • Surface mount – ceiling or wall; nominal 15"Dia.×5"D
  • .050" Aluminum housing
  • UV-Stabilized high impact polycarbonate lens
  • One year guarantee
Application(s):Parks and Recreation
Locker Rooms
Multifamily Housing
Restrooms
Stairwells
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Corridors
Exteriors and Entryways
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):15"
Listings: 
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
HardwareOne stainless steel Torx fastener.
Housing.050" aluminum. Housing provided with four-point mounting holes. Stainless steel internal lens retention brackets. Standard white exterior TGIC polyester powder coat finished – 5-step pre-treatment.
InstallationStandard four-point mounting on 8.875"×8.875" centers required for One Year Guarantee.
LensUV-stabilized, high impact resistant, injection molded polycarbonate. High efficiency blondel flute lens maximizes uniformity. Lens and housing secured with one concealed Torx® with center pin fastener.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Damp Location.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top