•  

R5

Ranger for Institutional Rough Service

Main Product Image
Model #: R5
Features:
  • Surface mount – ceiling or wall; nominal 5"×24", 5"×36", 5"×48", 5"×72"
  • 20-gauge cold rolled steel baseplate with one-piece extruded clear prismatic acrylic lens
  • ADA compliant
  • One year guarantee
Application(s):Parking Garage
Parks and Recreation
Locker Rooms
Multifamily Housing
Cafeterias
Walkways
Restrooms
Stairwells
Showers
Dorm Rooms
Schools and Universities
Corridors
Lamp Type(s):LED
Linear Fluorescent
Size(s):5"W
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED: Available 3500K, 4000K and 5000K color temperatures, 82 CRI. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Maximum driver source of 250 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor. One-lamp 90 minute nickel-cadmium battery pack (EL) includes inverter charger, test switch and charging indicator lamp – indoor use only.
HardwareTwo white nylon fasteners secure lens in baseplate channel.
HousingOne-piece 20-gauge CRS baseplate and end caps. Baseplate provided with four-point (2 and 3 foot), six-point (4 foot) and eight-point (6 foot) mounting holes and one wireway hole – see Cross Section/Details. White TGIC polyester powder coat – 5-stage pretreatment. Salt spray test: 1,000 hours; Reflectance: 92%. Baseplate/end caps mount flush to ceiling or wall surface.
InstallationFour-point (2 and 3 foot), six-point (4 foot) and eight-point (6 foot) mounting required for One Year Guarantee.
LensPositioned in baseplate channels and retained with two white nylon fasteners. One-piece extruded clear prismatic impact blend acrylic.
ListingsUL and CUL listed for Damp Locations – wall and ceiling mount. See WL Option for Wet Locations, covered ceilings only. ADA Compliant.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top