Skip to Content
Kenall Manufacturing - Homepage
Main Content

MR13FFL

Millenium Edge Cutoff for Architectural High Abuse

MR13FFL Main Image
MR13FFL Main Image
Model #: MR13FFL
Features:
  • Surface mount – ceiling or wall; 13"Dia.×3"D
  • Peace of Mind Guarantee® against breakage available
  • Dust and water protected to IP64 standards
  • Full cut-off for IDA-Approved™ Dark Sky installations
  • ADA compliant
Application(s):Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Stairwells
Schools and Universities
Corridors
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):13"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateMarine grade die-cast aluminum. Integral heat sinks. Baseplate flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Baseplate provided with four-point mounting holes, one wireway hole and temporary junction box mounting breakouts. Standard black or white exterior TGIC polyester powder coat – 5-step pre-treatment. Dark bronze optional finish.
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketingDie-cut, closed cell neoprene self adhesive gasket seals baseplate to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens base, baseplate and optional surface adapter.
HardwareOne stainless steel Torx® with center pin fastener.
InstallationFor wall mount installation, mount lamp base up on all HID lamp sources.
LensUV-stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener.
Lens BaseLens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate.
ListingsUL and CUL listed for Wet Location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 PER IEC 60598. IESNA-designated full cut-off. IDA-Approved™ Dark-Sky Friendly Fixture. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux.
ReflectorFull reflector/wire cover – 92% reflectivity.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps
and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

top