•  

ME22-ICT

MedMaster Envela Recessed Luminaires

Main Product Imageenvela_lampchange.jpgenvela_perf.jpg
Model #: ME22-ICT
Features:
  • Ceiling mount – 2'×2'
  • Provides on-demand environmental disinfection via LED light
  • Single, white disinfection mode
  • Independent laboratory tested to kill harmful bacteria, including Staph*, such as MRSA**
  • Fully sealed NSF2 rated impact resistant acrylic lens
  • Tool-less access for relamping and maintenance
Application(s):Cafeterias
Restrooms
Showers
Nursing Stations
Patient Rooms
Foyers and Lobbies
Corridors
Lens Type(s):Clear DR Acrylic with Internal Perforation
Frost High Impact Acrylic
Lamp Type(s):LED
Size(s):24"×24"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical Single, white disinfection mode. Serviceable mid-power white and 405nm Indigo LED array. Available 3200K, 3700K and 4300K color temperature with 3-step MacAdam variation allowance. Minimum 82 CRI standard. 120-277VAC and 347VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF). Minimum 85% driver efficiency. Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities. 400μA maximum source current.
Flange18-gauge CRS, standard 4-piece construction, spot-welded to housing. Mitered and welded corners.
Housing20-gauge CRS. One-piece seam welded construction. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
InstallationGrid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Kit.
Lamp ShieldingFully gasketed, sealed luminous shield of impact resistant DR acrylic. See Ordering Information for lens options.
ListingsUL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved.
PatentU.S. Patent No. 8,511,850.
Reflector/Lens Assembly20-gauge CRS. One-piece seam-welded construction.  Tool-free lamp access. White High (92%) Reflectance Low Gloss TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
WarrantyLimited five (5) year warranty on LED lamps.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top