|Baseplate||Die-formed marine grade aluminum; welded corners. Baseplate provided with six-point mounting holes, one wireway hole – see Cross Section/Details.|
TGIC Polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours.
|Electrical||Fluorescent electronic 120-277V and dual voltage ballasts high power factor (<10% THD). Replaceable high-brightness ANSI 4000K white LED array; 120-277V AC, high power factor electronic driver.|
|Hardware||Six stainless steel Torx® with center pin fasteners. Internal brackets and fasteners are non-corrosive. Surface Conduit Adapter (SCA) accessory – stainless steel trim frame assembly with integral J-box; finished to match lens frame (not available with CA finish). Water-tight conduit fittings supplied by others. Caulk Plate (CP) accessory – stainless steel plate (adds .625" height) finished to match lens frame (not available with CA finish). Stainless steel fasteners provided for mounting fixture to CP or SCA.|
|Installation||Standard six-point mounting required for Peace of Mind Guarantee®.|
|Lens||UV-stabilized, high impact resistant, pressure formed pearlescent 100% DR acrylic. Nominal thickness .125". Lens secured in place by lens frame and sealed to baseplate with closed cell silicone gasket.|
|Lens Frame/Cross Bars||Marine grade aluminum; secured to baseplate with tamper-resistant stainless steel Torx® with center pin fasteners. Cross bars nominal thickness .25". Post assembly TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours. Optional perf insert 30% open, stainless steel. See Ordering Information for standard, optional, architectural, and custom finishes.|
|Listings||UL and CUL listed for Wet Location. UL certified IP65 per IEC 60598. Photometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.|
|Lumen Data||FS1248R Lumen Data|
|Patent||U.S. Patent No. 7,029,139; D525,386; D526,082; D527,135; and D527,483.|
|Photometrics||For photometric information, go to www.kenall.com.|
|Reflector||Die-formed marine grade aluminum. Full reflector/wire cover – 92% reflectivity.|
|Warranty||One (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps|
and driver for defects resulting in a fixture lumen depreciation of 30% or greater.