MedMaster for Patient Rooms

MPCAE24 Main Image
MPCAE24 Main Image
Model #: MPCAE24
  • Ceiling mount – surface, grid or flange; 2'×4'
  • Provides ambient/reading and exam lighting
  • Optional Ingress Barrier Door provides consistent surface for cleanability
Application(s):Patient Rooms
Isolation Areas
Lamp Type(s):Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

DoorframeOPTIONAL DOORFRAME: IB-AC OR IB-HD OPTIONS ONLY. Heavy duty extruded aluminum with clear satin anodized finish. Doorframe supported to housing with aircraft cables (IB-AC) to provide NSF2 listing, or an optional continuous hinged doorframe (IB-HD). Select in ordering options below. Doorframe secured to housing with continuous hinge (20-gauge SS) and Phillips-head stainless steel fasteners. Closed cell silicone gasket seals doorframe to housing.
ElectricalFluorescent electronic 120/277V ballasts high power factor (<10% THD). See Ordering Information for optional equipment. Lamps by others. CL Option field adjustable to either side of bed. One 20W maximum, 12VAC, MR16, 120 or 277 volts. 8° narrow spot recommended. Exam area NEC compliant with isolated wiring compartment for auxiliary branch circuit feed.
HousingHousing: FLANGE AND GRID: 20-gauge CRS one-piece construction (IB is one piece seam welded construction). SURFACE: 18-gauge CRS one-piece seam welded construction. Housing Flange: FLANGE AND GRID: 18-gauge CRS, standard 4-piece construction, spot-welded to housing. Ingress Barrier (IB Option): Mitered and welded corners, spot-welded to housing. Housing Finish: White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Inside Flanges18-gauge CRS; fastened to housing. Black matte TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
InstallationSURFACE MOUNT: Four .312" diameter holes. GRID MOUNT: Designed for 1" and 1.5" grid. (Housing includes hanging brackets to secure housing with wire to super structure). FLANGE MOUNT: Yoke mounting hardware & brackets included. Install Frame and Plaster Frames both positively locates yoke brackets within ceiling opening assures alignment of fixture. Install frame has no need for drywall backing. Backing is supplied on the frame brackets.
Lamp ShieldingExam compartment shielded by sliding semi-specular aluminum parabolic louver. Clear protective lamp shield securely fastened above louver (see Ordering Information for alternate Lamp Shield Options). Ambient compartment lamps shielded by perforated steel (white TGIC polyester powder coat finish) with pearlescent acrylic diffuser. Note: Exam compartment clear protective lamp shield omitted when IB Option is specified.
ListingsUL and CUL Listed for Damp Location. IB Option UL certified IP65 per IEC 60598.
PatentU.S. Patent No. D562,767 on Low Voltage Controller (LVC) option.

This product complies with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.


Product Documentation

Installation Files

Additional Resources


Challenging Lighting Applications... Demand Kenall


For product information or layout assistance, connecting with us is easy:

Find a Rep

map marker icon


Helpful Links
Buy American Act Compliant

Buy American Act Compliant
Unless otherwise noted, our products comply with the Buy American Act: manufactured in the United States with more than 50% of the component cost of US origin.


A Brand of Legrand

© 2022 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.