Electrical | Class P ballasts. Fluorescent electronic dual voltage ballasts high power factor. |
---|
End Caps | Marine grade die-cast aluminum. Three styles available: Flat, Rounded and Reveal. Conduit and ”Wiremold™ ready” knockouts visible only from interior of end cap (Flat and Rounded styles only). |
---|
Hardware | (4) Stainless steel, tamper-resistant Torx® with center pin fasteners secure lens in housing body's lens channel. |
---|
Housing | Marine grade aluminum. Extruded body with die-cast end caps. Housing and end caps, TGIC polyester powder coat finished – 5-step pre-treatment. See Ordering Information for standard, optional, architectural and custom finishes. |
---|
Installation | Standard six-point mounting required for Peace of Mind Guarantee®. |
---|
Lens | UV-stabilized, high impact extruded clear or pearlescent polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .156". Lens securely positioned in body channels and end caps. Lens locked in place with tamper-resistant stainless steel Torx® with center pin fasteners and sealed with closed cell gaskets. |
---|
Listings | UL and CUL listed for Wet Location – covered ceiling mount. UL certified IP64 per IEC 60598 rated – ceiling mount. Corner, horizontal wall and pendant mount installation – damp location only. ADA compliant. |
---|
Patent | No. 6,984,055; No. 7,494,241; No. 8,550,656. |
---|
Reflector | Full reflector/wire cover – 92% reflectivity. |
---|
Sockets | Shock-resistant sockets with internal locking collar to ensure positive lamp retention. |
---|
Super High Frequency Occupancy Sensor | Controls line voltage to operate luminaire. Detects motion via electromagnetic waves, so it can be used behind luminiare lenses. 120/277 VAC operation. 20 foot radius of operation. Time delay from 30s-30m. Sensitivity adjustable. 50°C maximum case temperature. |
---|