Product Detail

MEP22

MedMaster Envela Recessed Luminaires

Model #:	MEP22
Features:	Recessed ceiling mount – grid or flange; 2'×2' Stands up to rigorous cleaning protocols Tool-less access for relamping and maintenance
Application(s):	Patient Rooms
Lens Type(s):	Clear DR Acrylic with Internal Perforation Frost High Impact Acrylic
Lamp Type(s):	Linear Fluorescent
Size(s):	24"×24"
Listings:

SPEC SHEET

Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Electrical	Fluorescent electronic 120, 277 or 347V ballasts high power factor (<10% THD). See Ordering Information for optional equipment. Lamps by others.
Housing	20-gauge CRS. One-piece seam welded construction. Black TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
Housing Flange	18-gauge CRS, standard 4-piece construction, spot-welded to housing. Mitered and welded corners.
Installation	Grid Mount: Designed for 1" and Slot-T grid. Includes hardware to secure hanger wire. Flange Mount: Includes Frame Accessory.
Internal Reflector	Luminaires with 4 (2/2) lamps are provided with specular aluminum reflector. Luminaires with 3 lamps are provided with White High Reflectance Low Gloss TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours.
Lamp Shielding	Fully gasketed, sealed luminous shield of impact resistant DR acrylic. See Ordering Information for lens options.
Listings	UL and CUL Listed for Wet Location. UL certified IP64 per IEC 60598. NSF2 Splash/Non-Food Zone.
Patent	U.S. Patent No. 8,511,850.
Reflector/Lens Assembly	20-gauge CRS. One-piece seam-welded construction. Reflectance 94%. White High Reflectance Low Gloss TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours. Tool-free lamp access.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.