HSEFRO24 Main Image
HSEFRO24 Main Image
Model #: HSEFRO24
  • Recessed ceiling mount; flange – 2'×4'
  • Top access for relamping for walk-on ceilings
  • 18-gauge, hole-free one-piece cold rolled steel housing
  • Closed cell extruded silicone gasket seals doorframe to housing
  • Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D, Class II, Division 2, Groups F, G and Class III.
Application(s): Hazardous Locations
Lens Type(s): .125" #12 Prismatic Polycarbonate
.125" Clear Polycarbonate
.156" Textured Tempered Glass
Specified Lens
.125" Clear Acrylic
.125" #12 Prismatic High Impact Acrylic
Lamp Type(s): Linear Fluorescent
Size(s): 24"×48"
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). One-piece 60° beveled perimeter construction. Continuous angle lens retention system. Mechanical guide for doorframe fastener alignment. Doorframe secured to housing with 12 fasteners (fasteners not accessible from room).
ElectricalQuantity and type as specified – see ordering information. All ballasts UL listed class P. Wireway hole provided with hub/ring/plug assembly. See Ordering Information for alternate or multiple ballasts, sealed wireway and optional equipment. Lamps by others.
GasketOne-piece closed cell extruded silicone gasket seals doorframe to ceiling structure. Closed cell extruded silicone gasketing seals top access door to housing.
Housing18-gauge CRS. Hole-free one-piece seam welded construction. White TGIC polyester powder coat finish – 5 step pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationAdjustable swing-out mounting brackets standard.
Lens.125" #12 high impact acrylic lens sealed to perimeter ledge of lens aperture with silicone sealant and secured with continuous lens retention system. Lens orientation – smooth side out. See Options for alternate lens selections.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. Meets K230 Leakage Standard for luminaire leakage in pressurized environments and FED-STD-209E/Class 100 (ISO 5) Cleanrooms. Standard Hazardous Location Listings include Class I, Division 2, Groups A, B, C, D; Class II, Division 2, Groups F, G (and Simultaneous Presence); and Class III. CCEA Approved.
PatentU.S. Patent No. 5,902,035.
Top Access DoorFull size 16-gauge CRS continuous hinged door secured with three stainless steel rotary action latches. Multiple return fabrication for strength and easy handling.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Product Documentation

Installation Files

Photometry (IES)


Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.