Electrical | Replaceable high-brightness LED array. See Ordering Information for color temperature and CRI options. 120-277VAC, 347VAC or 480VAC, 50/60Hz input with replaceable high power factor electronic constant-current driver (<20% THD, >0.90 PF). Standard 0-10V dimming with 10-100% range. Minimum 85% driver efficiency. EMC performance compliant with FCC CFR Part 15. Standard 20kV/kA surge protection to IEEE/ANSI C62.41 Cat. A. |
---|
Housing | Marine-grade die-cast aluminum construction. Integral aluminum heat sink with concealed air inlet and convection fins. All power electronics removed from primary thermal path; all drivers with dedicated heat sink to exterior of luminaire. TGIC polyester powder coat finish with five-step pre-treatment; salt-spray test 1,000 hours. See Ordering Information for available finishes. Closed-cell silicone gasketing at all housing interfaces. |
---|
Installation | PENDANT: Sealed threaded hub supplied for ¾" rigid pendant. Components by others. LOOP HANGER: Sealed hub with loop style hanger and 6' black power cord. IP65 rated quick connector. Hook by others. Center of gravity is along center axis of luminaire. TRUNNION: Length-adjustable trunnion bracket system with 6' black power cord and IP65 electrical hub. |
---|
Listings | Luminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location. IP65 rating per IEC 60598. Photometry tested to the IESNA LM-79 standard by an ILAC/ISO17025 accredited laboratory. |
---|
Lumen Data | HBMA26 Lumen Data |
---|
Note | Product is -40°C to 50°C rated unless otherwise noted. Photometry tested at 25°C. See Photometric Data for light output reductions at higher ambient temperatures. |
---|
Optics | Type II, III, IV, V-Narrow Round, V-Wide Square or Aisle-lighter optical distributions. Clear textured acrylic or polycarbonate tertiary flat lens for full-cutoff applications or injection-molded clear textured acrylic or polycarbonate tertiary drop lens for uplight and enhanced glare control. |
---|
Patent | U.S. Patent No. D702,395, U.S. Patent No. D713,990. |
---|
Warranty | Limited ten (10) year warranty. Click here for details. |
---|