EPFRO2424 Main Image
EPFRO2424 Main ImageEPFRO LatchEPFRO Lens RetentionEPFRO HingeEPFRO Aircraft CableEPFRO MaintenanceEPFRO GasketingEPFRO AccessFastener Detail
Model #: EPFRO2424
  • Recessed, top access; flange mount – 2'×2'
  • Top access for ease of relamping for walk-on ceilings
  • Lower one-piece doorframe provides air-tight integrity of luminaire
  • Can be installed in ceilings up to 6" thick
Application(s):Research and Development
Meat Processing Facilities
Industrial Food Processing Facilities
Lens Type(s):.156" Textured Tempered Glass
Lamp Type(s):HID
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe20-gauge type 304 stainless steel (#4 finish-post fabrication). Continuous angle lens retention system. Doorframe secured to housing with steel aircraft cables and (8) captive Phillips flat head stainless steel fasteners. Thumb screws used for FN option.
Doorframe Gasket.375" thick closed cell neoprene seals door frame to frame assembly.
ElectricalAll HID ballasts UL listed HPF type. See Options listing for alternates. Mogul base lamps only. Electrical connection – upper housing with two 1/2" knockouts for installation of flexible conduit.
Frame Assembly14-gauge stainless steel. One-piece seam welded construction. Designed for installation in up to 6" nominal thickness foam ceilings.
HousingUpper –18-gauge CRS. Hole-free one-piece seam welded construction with continuous full length piano hinge on one side. Secured with two zinc plated steel latches (for easy access to lamp and ballast compartment). Lower housing – 18-gauge CRS. Hole-free one-piece seam welded construction. Upper and Lower housing white TGIC polyester powder coat finish – 5-step pretreatment. Salt spray test: 1,000 hours; Reflectance: 92%.
InstallationLuminaires shall be installed in structural foam ceilings up to 6" nominal thickness. Lower housing has four brackets for suspension from rod.
Lens.156" C73 tempered glass lens sealed to perimeter ledge of lens aperture secured with continuous lens retention system. Lens orientation – smooth side out. NSF2 Food Zone/Non-Contact FDA approved Food Zone exterior lens over glass.
ListingsETL Listed for Wet Location. Certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone. CCEA Approved.
ReflectorDie-formed aluminum reflector – Type V distribution.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.


Product Documentation

Installation Files

Photometry (IES)

Additional Resources

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA


A Brand of Legrand

© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.