•  

VL23

MedMaster Vanity Mirror

Main Product ImageVL23_FV001.pngVL23_FV002.png
Model #: VL23
Features:
  • Wall Mount – 35"×28"
  • Ideal for healthcare patient rooms, restrooms or dressing areas
  • Continuous hinge with left or right door access for relamping
  • Surface mount capability
  • ADA compliant
Application(s):Patient Rooms
Lamp Type(s):LED
Linear Fluorescent
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge Type 304 stainless steel with brushed finish. 45° beveled perimeter construction with welded corners. Doorframe secured to housing with continuous hinge and 2 concealed stainless steel Torx® head with center pin fasteners. Continuous lens and mirror retention system.
ElectricalFluorescent – rapid start electronic high power factor ballast, lamps by others. Replaceable high-brightness LED array; ANSI 3000K color temperature; 90 CRI. 120-277VAC high-power factor constant current driver. 10-100% dimming with compatible 0-10V current sink dimmer.
HousingOne-piece 18-gauge CRS. Corners continuously seam welded and smooth. TGIC polyester powder coat gray – 5-stage pre-treatment. Salt spray test: 1,000 hours.
InstallationFour .312" diameter holes. Universal mounting allows fixture to be installed such that door will open from right or left for relamping.
Lenses/Mirror0.125" thick white acrylic lenses and 0.125" thick, safety-backed mirror sealed to doorframe with silicone gaskets.
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratories for damp locations. ADA compliant. NSF2 Splash/Non-Food Zone. Photometry tested to the IESNA LM-79-08 standard by an ILAC / ISO17025 accredited laboratory. Kenall certifies product by both Underwriters and Intertek Testing Laboratories.
PatentU.S. Patent pending.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top