Skip to Content
Kenall Manufacturing - Homepage
Main Content

TL100

TekLink Controls

TL100 Main Image
TL100 Main Image
Model #: TL100
Features:
  • Zonal occupancy and daylighting control
  • Low-voltage dimming control of luminaires
  • Suitable for new and retrofit installations
  • Self-commissioning of light level
  • L70 LED lifetime indication
  • Infrared and dual-technology occupancy detection options
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

HousingSeam-welded 18-gauge CRS. White TGIC polyester powder coat finish with five-step pre-treatment. Salt spray test: 1,000 hours. Housings provided with multiple 7/8" and 1" conduit knockouts. Controller housing includes clear polycarbonate window for viewing of system status indicators. Silicone gasketing. Sensor housing includes a tamper-resistant Torx® fastener. Controller housing includes pin-tumbler style keyed lock. All control module locks are keyed alike. Two keys included.
InstallationSuitable for mounting to wall or ceiling surfaces with four-point mounting. All signal cabling shall be wired Class I with 18AWG, 600V TFFN wire. Suitable for temperaturesof -40°C to 40°C.
ListingsSENSOR: Infrared sensor is Listed to UL508 for Wet Location, Covered Ceilings and Certified IP65 per IEC 60529. Ultrasonic sensor is Listed to UL508 for Dry Locations. CONTROLLER: Wet Location – Covered Ceiling and Wall Mount Listed to UL 508. Certified IP65 per IEC 60529. All listings and certifications by Intertek Testing Laboratory.
PatentNo. US 8,810,137 B2.
TekLink ControllerCentralized, zonal area occupancy and daylighting controller. Automatic self-commissioning of system parameters. L70 LED lifetime detection indicator. Adjustable ‘standby’ light level setting (20%-100%). Receives input from up to six (6) TekLink sensors. 0-10VDC dimming signal output to luminaires. Controls up to 32 luminaires per controller.Controllers can be interlinked to operate additional luminaires and sensors per zone. Integral LED indicators provide system status. Dual Technology controller requires input from both infraredand ultrasonic sensors.
TekLink SensorOperates by low-voltage power provided by TL100 Controller. INFRARED: Passive infrared (PIR) occupancy detection with integral light level sensor. Lenses options provide 360° coverage at various mounting heights and coverage areas. Adjustable occupancy time-out delay: 0 – 30m. ULTRASONIC: High-frequency (40kHz) occupancy detector suitable for open area detection with line-of-sight obstructions; no light level sensor; includes sensitivity adjustment; suitable for wall and ceiling mount. Adjustable occupancy time-out delay: 5m – 30m.
WarrantyOne (1) year warranty on materials; five (5) year warranty on sensor.

Downloads

Product Documentation

Additional Resources

top