•  

TES8

EnviroSeal for Transportation

Main Product ImageTES8_FV_controwmount.jpgTES8_FV_lensopen.jpg
Model #: TES8
Features:
  • Surface – ceiling or wall mount;
  • 8"×24", 8"×36", 8"×48"
  • Hinged door for ease of maintenance
Application(s):Parking Garage
Transportation Platforms
Underpass and Tunnel
Lens Type(s):Clear Prismatic Polycarbonate
Pearlescent Polycarbonate
Lamp Type(s):Linear Fluorescent
Size(s):8"W
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BaseplateContinuous seam welded 18-gauge type 304 stainless steel construction. Mounts flush to ceiling or wall surface. Each end cap provided with .875" dia. punched, flattened knockout.
ElectricalElectronic ballast <10% THD standard. See Ordering Information for multiple ballasts and optional equipment. Lamps by others.
FastenersTorx® Head stainless steel fasteners standard. See Options for stainless steel center-pin reject Allen Head (AH) or Phillips Head (PH) fasteners.
FinishBrushed stainless steel finish (#4B) or white TGIC polyester powder coat – 5-stage pre-treatment; Salt spray test: 1,000 hours; Reflectance: 92%.
HingeContinuous 1" open leaf stainless steel hinge secured to door and housing.
HousingOne-piece seam welded 16-gauge type 304 stainless steel construction.
InstallationFor housing without wiring and mounting holes, see Field Drilled Installation Holes Option (FDIH). Four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®.
Lens RetentionLens positioned in channels and retained with stainless steel fastener(s).
Lens/GasketUV-stabilized, pearlescent or clear polycarbonate. Smooth exterior, linear prismatic interior. Nominal thickness .125". Linear silicone gasket seals lens housing to baseplate.
ListingsUL and CUL listed for Wet Location – covered ceiling or horizontal wall mount. UL certified IP65 per IEC 60598.
Lumen DataTES8 Lumen Data
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention
WarrantyFour-point mounting, polycarbonate lens and Torx® with center pin fastener (1) required for Peace of Mind Guarantee®.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top