•  

S1414D

Sentinall for Institutional High Abuse

Main Product Image
Model #: S1414D
Features:
  • Surface ceiling mount – 14"W×14"W×5"D
  • 18-gauge cold rolled steel baseplate
  • UV-stabilized, injection molded polycarbonate lens
  • Stainless steel Torx® fasteners
Application(s):Locker Rooms
Multifamily Housing
Restrooms
Dorm Rooms
Schools and Universities
Foyers and Lobbies
Lens Type(s):Pearlescent
Lamp Type(s):LED
Size(s):14"×14"
Listings:   
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate18-gauge CRS. Baseplate provided with four-point mounting holes, one wireway hole and junction box mounting keyholes. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%. See Options or Accessories for marine grade aluminum baseplate (AL) and/or CRS or aluminum surface adapter.
ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC or 347VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA.
GasketDie-cut closed cell neoprene gasket seals lens/housing to mounting surface.
HardwareTwo stainless steel Torx® with center pin fasteners secure lens/housing to baseplate.
InstallationStandard four-point mounting required for Peace of Mind Guarantee®.
Lens/HousingOne-piece wraparound lens/housing. UV-stabilized, high impact, virgin injection molded polycarbonate. Housing section available in Matte White or Dark Bronze finish.
ListingsLuminaire is certified to UL Standards by Intertek Testing Laboratory for Wet Location – covered ceiling mount.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory. For additional photometric data, please go to www.kenall.com.
ReflectorFull reflector/wire cover – white finished aluminum (92% reflectivity).
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps and driver for defects resulting in a fixture lumen depreciation of 30% or greater.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top