Skip to Content
Kenall Manufacturing - Homepage
Main Content

RSEFI24

SimpleSeal Research

RSEFI24 Main Image
RSEFI24 Main ImageAircraft CableFastener DetailSureShield FilterSwing-out ArmsHermetically Sealed Housing
Model #: RSEFI24
Features:
  • Recessed; flange mount inset door – 2'×4'
  • Sureshield™ Stainless steel mesh filter reduces radiated emissions. Meets MIL-STD-461G – Air Force/Navy Fixed
  • 18-gauge cold rolled steel, hole-free housing
  • One-piece inset door frame, secured to housing with aircraft cables
  • UL certified IP65 per IEC 60598
Application(s):Containment Areas
Laboratories
Research and Development
Lens Type(s):Specified Lens
Micro Linear Prism
Lamp Type(s):Linear Fluorescent
Size(s):24"×48"
Listings:      
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Doorframe18-gauge CRS. One-piece inset construction welded corners. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours;
Reflectance: 92%. Doorframe secured to housing with stainless steel aircraft cables and captive flush mounted Phillips head stainless steel fasteners. One-piece closed cell silicone gasket seals doorframe to housing and ceiling structure.
ElectricalElectronic ballast <10% THD. Programmed-Start, low voltage electronic dimming ballast (DM7) designed to operate T8 or T5HO fluorescent lamps over a full range of light output (100-3% T8; 100-1% T5HO). Minimum Power Factor .98 for T5HO and .99 for T8. THD at full light output 10%. Operates from compatible 0-10VDC controllers on Class 1 or Class 2 low voltage systems. See Ordering Information for alternate or multiple ballasts and optional equipment. Lamps by others. RFI suppressor standard – one per circuit, one circuit standard.
Housing20-gauge CRS. Hole-free seam welded construction. White TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
Housing Flange18-Gauge CRS. Mitered and welded corners then spot-welded to housing before painting.
InstallationAdjustable swing-out mounting brackets.
LensTwo piece design. Smooth lens exterior is .125" clear acrylic, sealed to doorframe with silicone sealant. Interior lens is .030" acrylic micro linear prism, both lenses mechanically secured in place. See options for alternate lens.
ListingsUL and CUL Listed for Wet Location. UL certified IP65 per IEC 60598. NSF2 Splash/Non-Food Zone.  Meets Standard for luminaire FED-STD-209E/Class 100 (ISO 5) Cleanrooms. MIL-STD-461G – Air Force/Navy Fixed (standard with electronic and electronic dimming ballasts). CCEA approved.
OpticsCRS with a high reflectance powder coated surface. Asymmetric reflectors are premium 95% specular aluminum. Green phosphor lamp (GL Option) located in symmetric reflector area (see Cross Section on back).
PatentU.S. Patent No. 7,648,252.
SureshieldStainless steel mesh filter reduces radiated emissions.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Additional Resources

top