Skip to Content
Kenall Manufacturing - Homepage
Main Content

RMCD-ICT

Mighty Mac

RMCD-ICT Main Image
RMCD-ICT Main ImageRMC Converter Install 1RMC Converter Install 2
Model #: RMCD-ICT
Features:
  • Provides environmental disinfection and effective, efficient lighting performance via visible LED light
  • Dual-Mode Indigo-Clean Technology is independently tested to kill 94% of SARS CoV-2 and Influenza-A***, in addition to MRSA
  • Single-Mode Indigo-Clean Technology is independently tested to kill harmful bacteria, such as Staph*, including MRSA**
  • Recessed convertible ceiling mount
  • TIG-welded housing without post-weld grinding and full-length concealed internal piano hinge for strength
Application(s):Cells
Dayrooms (Correctional)
Cafeterias
Restrooms
Showers
Corridors
Sally Ports
Behavioral Health
Recreational (Correctional-Indoor)
Lens Type(s):No Lens
.125" Prismatic Acrylic
.125" #12 Prismatic Polycarbonate
.125" Textured Polycarbonate
.156" Prismatic Polycarbonate
.187" Prismatic Polycarbonate
.187" Clear Polycarbonate
.187" Clear Tempered Glass
.250" Clear Polycarbonate
.250" Clear Tempered Glass
.375" Clear Polycarbonate
.375" Clear Tempered Glass
.125" Clear Polycarbonate
.500" Clear Polycarbonate
.500" Clear Tempered Glass
.250" Textured Tempered Glass
Lamp Type(s):LED
Size(s):24"×48"
24"×24"
Listings:  
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

BallastQuantity and type as specified – see ordering information. All ballasts UL listed class P.
DoorOne-piece die-formed prime grade material as specified – see ordering information. Corners continuously seam welded and smooth with no post grinding (TIG).
Electrical(Single- and Dual-Mode ICT) Serviceable mid-power white and 405nm Indigo LED array.  Available 3200K, 3700K and 4300K color temperatures with 3-step MacAdam variation allowance.  Minimum 82 CRI standard. 120-277VAC and 347VAC electrical input with serviceable high power factor electronic, constant-current drivers (<10% THD, >0.90 PF).  Minimum 85% driver efficiency.  Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities.  330μA maximum source current.  Single-Mode ICT provides a single, white disinfection operational mode.  Dual-Mode ICT provides two operational modes based on room occupancy.  White Disinfection Mode is a white LED array for ambient lighting plus a simultaneous low-power 405nm LED array for low-level, continuous and safe environmental disinfection.  Indigo Disinfection Mode is a higher-level 405nm array for continuous safe environmental disinfection during periods of room vacancy.  The operational mode is determined via internal low-voltage device based upon the input signal provided by an external control device/system.  Luminaire dimming is overridden in this operational state.  Refer to the Kenall Dual-Mode ICT Control Application Guide for further description.
FastenersFully recessed hardened security screws as specified – see ordering information.
HousingDie-formed prime grade material as specified – see Ordering Information. TIG and spot welded construction. Full length completely concealed internal piano hinge (1/2" knuckle/1/8" diameter pin) standard. Pin secured to knuckle. Hinge welded to door. TGIC polyester powder coat – 5-stage pre-treatment. Salt spray test: 1,000 hours; Reflectance: 92%.
LampsQuantity and type as specified – see ordering information. Lamps supplied by others.
LensAs specified – maximum overall thickness .375" – see Ordering Information. High-efficiency diffused DR acrylic inner lens. Lens retention by vertically adjustable continuous “Z” brackets of prime grade material, secured to housing via thru-studs (6" maximum spacing). Polyurethane foam prevents light leaks from luminaire base.
ListingsUL and CUL listed for damp locations. See ordering information for wet location applications. Non IC rated.
PhotometricsEfficiency of RMCD4-2/2-432-IS-1-120-1/9-1 = 64.5%. For photometric information, go to www.kenall.com.

This product is able to comply with the latest domestic preference legislation, such as the Buy American Act (BAA), Trade Agreement Act (TAA), Build America, Buy America Act (BABA), and others.

Downloads

Product Documentation

Installation Files

Photometry (IES)

REVIT Files

Additional Resources

top