Nova I for Institutional High Abuse

Main Product Image
Model #: N548
  • Surface mount – wall or ceiling; 5"×48"
  • 16-gauge cold rolled steel baseplate with six-point mounting
  • One-piece seam wraparound polycarbonate lens
  • Peace of Mind Guarantee®
Application(s):Parking Garage
Parks and Recreation
Locker Rooms
Multifamily Housing
Dorm Rooms
Schools and Universities
Transportation Platforms
Sally Ports
Lens Type(s):Clear Prismatic Polycarbonate
Lamp Type(s):LED
Linear Fluorescent
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

Baseplate16-gauge CRS. Baseplate provided with eight-point mounting holes and one wireway hole. TGIC polyester powder coat – 5-stage pre-treatment. Salt
spray test: 1,000 hours; Reflectance: 92%.
ElectricalLED: Available 3500K, 4000K and 5000K color temperatures. 120-277VAC, 50/60Hz electrical input with serviceable high power factor electronic, constant-current driver (<20% THD, >0.95 PF). Standard 0-10V dimming with 3-100% range, maximum driver source of 250 μA. LF: Class P ballasts. Fluorescent electronic 120/277/347 and dual voltage ballasts high power factor. 0°F min. starting temperature standard.
GasketDie-cut closed cell neoprene gasket seals lens/housing to mounting surface.
HardwareSix stainless steel Torx® with center pin fasteners secure lens/housing to baseplate.
InstallationEight-point mounting required for Peace of Mind Guarantee®. “Twist-out” sections, with gaskets, permit 1/2" conduit access on each end without special adapter.
LensOne-piece wraparound lens with eight alignment security tabs for baseplate engagement. UV-stabilized, high impact, virgin injection molded clear prismatic polycarbonate. Nominal thickness .125".
ListingsUL and CUL listed for Damp Locations – wall mount. UL and CUL listed for Wet Location – covered ceilings only. All Kenall SSL Luminaires are tested to the IESNA LM-79-08 standard requiring spectroradiometric measurements for CRI and CCT as well as goniophotometric measurements for lighting distributions and total luminous flux.
Lumen DataN548 Lumen Data
PatentU.S. Patent No. 246330; 4025780.
PhotometricsFor photometric information, go to www.kenall.com.
SocketsShock-resistant sockets with internal locking collar to ensure positive lamp retention.
WarrantyLimited five (5) year warranty for LED lamps.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall


For product information or layout assistance, connecting with us is easy:


map marker icon


Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.