•  

MRIDL4

MedMaster Downlights

Main Product Image
Model #: MRIDL4
Features:
  • 4" sealed, recessed downlight with round or square aperture
  • Designed for MRI applications with non-ferrous construction and RF-free electronics
  • Delivered lumens: 930 - 1,364 lm
  • 1% Dimming via 0-10V control
Application(s):MRI Imaging Suites
Lamp Type(s):LED
Size(s):4" Aperture
Listings:    
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalLED array available in multiple CCT and CRI combinations with a maximum 3-step MacAdam variation allowance. See Trim Ordering Information for available options. Luminaire input 24VDC from remote-located, 120-240 VAC, high-power-factor power supply (see MRIPS-312, ordered separately). Standard 0-10V dimming with 1-100% range and dim-to-dark capabilities.
HeatsinkDie-cast aluminum with external radial fins for natural convection.
InstallationAll power and signal wiring must be in completely grounded aluminum conduit. Light engine and internal driver are replaceable post-installation. MRI room EMI filters required (supplied by others).
ListingsLuminaire is certified to UL standards by Intertek Testing Laboratory for IC and Wet Location installations. IP64 rating per IEC60598. NSF2 Splash/Non-Food Zone.
OpticalHigh-Efficiency mixing chamber design with regressed diffused tempered-glass lens producing uniform light output. Round or square aperture. Available with various reflector finishes. See Reflector Finish Ordering Information for available options.
PhotometricsPhotometry tested to the IESNA LM-79-08 standard by an ILAC/ISO17025 accredited laboratory.  For photometric information, go to www.kenall.com.
Rough-In FrameDie-formed aluminum construction. Vertically adjustable collar accommodates ceiling thicknesses up to 2", adjustable post-installation. Adjustable mounting bars for installation with wood and metal frame joists and T-grid ceiling systems spaced up to 24" on-center. Junction box accessible post-installation from above and below ceiling. (7) 1/2" knockouts.
Trim/Housing SectionIP-rated housing section incorporates the heat sink, LED module, optics and lower trim. Configurable with an IP64-rated Regressed lens trim that is secured to the Rough-In frame with hidden torsion springs. Anti-microbial finish standard on all exposed painted surfaces.
WarrantyOne-year SafeScan(TM) guarantee on EMI susceptibility. Five (5) year warranty against mechanical defects. Five (5) year warranty on LED lamps and power regulation components for defects resulting in a fixture lumen depreciation of 30% or greater. Warranty is void if all wiring is not shielded in continuously grounded aluminum conduit.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Downloads

Specification Sheets

Installation Files

Photometry (IES)

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top