•  

MR17FFD

Millenium Edge Cutoff for Architectural High Abuse

Main Product Image
Model #: MR17FFD
Features:
  • Surface mount – ceiling or wall; 17"Dia.×6"D
  • Peace of Mind Guarantee® against breakage available
  • Dust and water protected to IP64 standards
  • Full cut-off for IDA-Approved™ Dark Sky installations
Application(s):Parks and Recreation
Multifamily Housing
Walkways
Restrooms
Stairwells
Schools and Universities
Corridors
Lens Type(s):Pearlescent Polycarbonate
Lamp Type(s):LED
Size(s):17"
Listings:     
Specifications are subject to change without notice. Please consult your Kenall Customer Service for help with special requests at (800) 4 Kenall.

Technical Specifications

ElectricalAvailable in 3500K, 4000K, and 5000K color temperatures, 80 CRI. 120-277VAC, 50/60Hz electrical input with high power factor electronic, constant-current driver (>.90 PF). Standard 0-10V dimming with 1-100% range; maximum driver source of 200 μA. Optional Motion Sensor (MS) has factory default settings of 20 minute time out, 30% dimming.
GasketingDie-cut, closed cell neoprene self adhesive gasket seals housing to mounting surface. Closed cell, silicone “O” ring gaskets positioned and friction secured in gasket channels of lens base and housing.
HardwareOne stainless steel Torx® with center pin fastener.
HousingMarine grade die-cast aluminum. Rib reinforced construction. Integral heat sinks. Housing flange interlocks and wraps around lens base producing maximum moisture deflection and resistance to prying. Housing provided with four-point mounting holes, one wireway hole and temporary junction box mounting drill points. Standard black or white exterior TGIC polyester powder coat – 5-step pre-treatment. Dark bronze optional finish.
InstallationFor wall mount installation, mount lamp base up on all HID lamp sources.
LensUV-stabilized, high impact resistant, virgin injection molded polycarbonate. Close tolerance push/turn/lock-in-place mating of injection molded lens and lens base. Lens and lens base secured with one concealed captive Torx® with center pin fastener.
Lens BaseLens base shields lamp from viewing angles. High impact resistant, injection molded opaque black, bronze or white polycarbonate.
ListingsUL and CUL listed for Wet Location (listing includes Emergency Battery Pack “EL” option). UL certified IP64 per IEC 60598. IESNA-designated full cut-off. IDA-Approved™ Dark-Sky Friendly Fixture.
ReflectorCompact Fluorescent: Full reflector/wire cover – 92% reflectivity. HID: Full reflector/wire cover. High efficiency semi-specular aluminum.
WarrantyOne (1) year warranty against defects in materials and workmanship. Five (5) year warranty on LED lamps
and driver for defects resulting in a fixture lumen depreciation of 30% or greater. Standard four-point mounting and polycarbonate lens required for Peace of Mind Guarantee®.

Where you see this symbol, the Kenall product shown is manufactured in the USA with components purchased from US suppliers, and meets the Buy American requirements under the ARRA. Kenall has not determined the origin of its domestically purchased components or the subcomponents thereof.

Advanced Lighting Solutions... Demand Kenall

START A CONVERSATION

For product information or layout assistance, connecting with us is easy:

FIND A REP

map marker icon

Search

Helpful Links
Designed and manufactured in the USA
© 2017 Kenall Manufacturing. All Rights Reserved.

This site is powered by the Northwoods Titan Content Management System.

top